Cablaggio GPS

Our flexible and shielded GPS Wire Harness keeps your GPS signal clear and strong at all times. It stops all the errors that can break your signal. The wires are flexible and tough.

Ottenere un preventivo rapido

Introduzione al prodotto

The Vehicle GPS wire harness lets you always know where your car is. This complete set includes a GPS antenna, strong links, flexible cables, and a GPS wire harness. Every wire acts as a noise filter to keep connections strong and clear. To connect the wires, all you have to do is match the power, ground, and antenna connections. Cut without making a mess. The wires are made of high-quality copper, which keeps the current steady and makes them last a long time. The outside cover keeps out dust and water, so it's good for any kind of weather. The GPS tracker can be hidden in a lot of places, like the trunk, behind panels, or under seats. It can be used in almost any vehicle because it runs on 12V. To guarantee a powerful signal and complete safety, each element is tested carefully. Easy to set up, built to last, and easy to use. You'll always be able to track things smoothly, no matter where you are.

Ottenere un preventivo rapido

Product Advantages

The Vehicle Antenna Extension Cable

Your GPS antenna could catch signals from extra satellites if you use this cable to extend it into the open air. It may be twisted without breaking and works for all vehicle kinds. To shield the signal from heat and noise, it contains more layers. No matter how rough the road becomes, the ends will lock securely. Anywhere on the hood, dashboard, or roof will do. The GPS signal is kept clean and quick by it. No matter where you're driving, this GPS antenna wire harness will keep your signal strong and dependable.

Wired GPS Tracker With External Antenna

There is no power outage with this tracker. Because it is firmly attached to your vehicle's battery, it is always active. Charging it is unnecessary. You may use the exterior antenna to acquire a strong signal even if you conceal the tracker inside your vehicle. The data remains clear, and the noise is stopped by the robust wire. It will continue regardless of the weather. You can always know where to find of your automobile is because it transmits updates often. It's trustworthy, intelligent, and secure.

The Compact GPS Tracker Unit

The system's brain is this little gadget. It may be little, but it packs an important punch. On the inside, you'll find a 4G modem, motion sensors, and a GPS chip. No problems with heat, bumps, or shocks here. After set up, it tracks silently, undetected. It is reliable, produces quick results, and works without fail. It works wonderfully on motorcycles, vehicles, and trucks. Everything you need in a compact, intelligent, and powerful package.

The External GPS Antenna

Your GPS tracker can find satellites faster with this antenna. Mounting options include the trunk, dashboard, or roof. Even while moving at great speeds, it stays firmly attached to a magnet. It can withstand wind, rain, or sun. Rust and fading are banished by the coating. It improves outcomes by reading signals through painted surfaces and glass. Once attached to the vehicle's GPS antenna wire harness, it guarantees a solid GPS signal constantly. It's little, powerful, and constantly prepared.

Solution

We design and manufacture simple wiring systems for all types of vehicles, including cars, buses, and trucks. You don't need to cut or tape anything. Every wire fits perfectly, saving time and making work easier. The plugs lock tight and keep out dirt and heat. Our harnesses keep the power steady and signals clean so your GPS works without any problem.

Vehicle-Specific T-Harness/Adapter

This GPS wire harness works with all kinds of cars and trucks. Just put the plug in. There is no need to cut or otherwise mess with the original wiring. It hides well under panels, just like an OEM part. It keeps the setup neat and safe. The parts of this set are strong, so it will last a long time. Just one plug-in is all it takes. The inside of the car is clean, safe, and nice to look at.

OBD II Extension Cable/Splitter

You can use this cable to connect your GPS tracker to the onboard diagnostics port of your car. It looks like a "T" and lets you charge the tracker without taking it out of the OBD tool. A built-in fuse keeps the device safe. It's easy to work with and flexible, even when it's cold. It's perfect for one car or a whole fleet. It starts working right away after you plug it in.

Tracker Power Harness with Fuse

This wire set could safely power your GPS tracker. There are three main wires: power, ignition, and ground. A built-in fuse protects your car. You don't have to cut or tape it to fit in the fuse box. It is safe for all cars and simple to use. This GPS wire harness comes with a fuse tap, so your tracker will always have power and protection.

Ottenere un preventivo rapido

Material Recommendation

Tinned Copper Conductor

The GPS wire harness has a lot of small copper wires that quickly carry electricity. To keep rust, moisture, and salt from damaging the wires, a thin layer of tin is put on each one. The shiny coating on the copper makes it resistant to heat and cold. This makes wires flexible and hard to break or crack. The GPS wire harness is strong because it is made of tinned copper, and it ensures that the connection is smooth and safe at all times.

RF Coaxial Cable

These custom wires make it possible for GPS signals to be sent clearly and effectively. There are a lot of layers of copper inside to keep noise from the outside out. The jacket is still strong, but it can be easily bent. The signal is still crystal clear, no matter how long you use it. These wires would be very helpful for any kind of vehicle, even cars and trucks. If you take the time to cover and seal the GPS wire harness for your car, it will last for many years.

Braided Sheath

The braided wrap protects the wires by being strong but flexible. You can bend and twist the nylon fabric without it losing its shape. It stops the wires from getting damaged by cutting, rubbing, or bumps. The small holes in the cover let air flow through, which keeps the inside cool and dry. This cover protects the wires from getting damaged or not working properly while cars quickly drive over rough roads or through dust and mud.

Plastic Granules

A strong but flexible plastic cover protects the wires from sunlight, heat, oil, and fire. The coating keeps the wires smooth and flexible. It also helps the cables last longer and stay safe. Some cables use stronger materials, like FEP or PTFE, so they can be used in places with high temperatures. Don't worry, these materials are safe and will last a long time. They help keep your car's wires clean and safe.

Tinned Copper Braided Mesh

This part looks like a fragile net made of very thin metal strands. Each wire is covered in tin to keep it from rusting and to keep its shine. The mesh protects the wires from interference and unwanted signals. It also protects against wear and heat. Even when exposed to high temperatures or vibrations from machinery, the mesh stays strong and flexible. It keeps the sound and signal quality crystal clear.

GPS Locator

The GPS tracker's hard plastic case can withstand heat, water, and dirt. Inside it has a GPS chip, a 4G modem, and an antenna that picks up signals quickly. A metal shield protects it from noise and shocks. The tight body seal keeps out dust and water. It is tested for drops and extreme heat to make sure it lasts a long time. The tracker is now strong, safe, and ready to go at any time.

Ottenere un preventivo rapido

Industries and Applications

Fleet Management & Logistics

These harnesses are often used by taxis, vans, and trucks that move people and things. They help keep track of where the cars are, how much gas they use, and how well their engines work. The strong lid keeps out heat, grease, and vibration. It's easy to put in a lot of cars. Managers can make sure everything is going according to plan by keeping an eye on the fleet's status in real time. The technology helps save money, cuts down on fuel waste, and keeps drivers safe. The strong GPS wire harness makes everything work better and last longer.

Motorcycles & Powersports

Because motorcycles and all-terrain vehicles (ATVs) vibrate a lot and move quickly, you need special harnesses to use them. Our wires are very thin, very light, and can handle water. The seat and the handlebars are both big enough for them to fit. Use them to help your riders find their way, light their way, or keep them safe. They can't be hurt by anything, not even mud, rain, or sunshine. The GPS wire harness looks clean and stays out of sight while keeping everything working well. It lets people relax on long trips without having to worry about wires.

Marine & Outdoor Recreation

Every day, campers, jet skis, and boats were hit by water, salt, and the sun. These harnesses keep water and debris from getting to the cables. The copper wires inside are protected from rusting and always have power because they are coated with tin. The cover on the outside lasts a long time and keeps harmful UV rays from getting in. You can put them on decks, roofs, and trailers. You can use them to keep track of things, light things up, and see how much power they use. The passage of time does not affect their ability to adapt, stay safe, or last.

Construction & Heavy Equipment

Heavy machinery like bulldozers, tractors, and cranes works hard in hot, dusty conditions. These strong wires can handle the job. Operators can safely keep an eye on how their devices work because power and data can be sent safely. Because the thick covers don't bend or rip easily, they need less maintenance. These wires make it possible for work to go on without any problems. They keep heavy tools safe and working every day, even in the dirtiest and toughest places.

Public Safety & Government

Emergency vehicles need wiring that never fails. If you wear one of these harnesses, your lights, GPS, and cameras will always be on. You don't have to cut or rewire them to fit in cars. The parts won't come apart even when they are shaken or heated up. They meet all the safety standards for vehicles. This will make sure that everything works quickly and safely when it matters most. The harnesses make things happen faster, keep workers safer, and cause less trouble during emergencies.

Consumer Vehicles & Rental

These harnesses work with any type of vehicle, from family cars to rental fleets. You can use them right away by plugging them in. Panels hide the cables so that they can't be seen. They help keep track of cars, stop theft, and keep the system running. You can use these in most cars without having to make any changes. You don't need any special tools to put them in, and they are easy to do. They are built to be useful, last a long time, and be easy to use.

Advanced Manufacturing & Customization

The steps to make a GPS wire harness are these:

Project Scope and Design: We begin by identifying your vehicle and system type. After deciding on the right connectors, we set up the cable paths.

Constructing a small GPS wire harness to test for proper fit and functioning is the initial stage in creating a functional prototype.

Strength, safety, and flexibility are our top priorities when choosing materials for cables and covers.

The process of making your harness by casting it in molds will begin once you approve the design.

When we construct the harness, we take our time to ensure that it is completely airtight and watertight.

The power and fit of each harness is double-checked before it is packed and sent out.

We will make sure to keep you updated every step of the way. No matter how many harnesses you need, we can make them for you in no time at all. Any adjustments or revisions that are required may be made quickly and easily by us.

Ottenere un preventivo rapido

Ensuring Reliability, Durability, and Compliance

The Anti-Vibration Strain Relief Matrix

Cars and trucks move, shake, and bounce all the time. This can cause wires to wear out quickly. Our design stops that from happening. We use loops, soft rubber rings, and covers that let wires move but not pull too hard. The soft parts absorb shaking, so nothing breaks. Each piece shares the pressure, so no part takes too much strain. This keeps the wires tight and power flowing clearly. The GPS wire harness stays safe, steady, and strong even after many years on rough roads. It helps protect every part from stress, keeping the system working quietly and smoothly.

Automotive Compliance & Integration

Our harnesses comply with all applicable car and truck safety regulations. Every part can handle heat, water, and sound noise. They integrate easily with other systems, such as CAN bus. All plugs and wires are thoroughly tested for strength, heat resistance, and safety. They meet all major rules, including CE, FCC, and local car standards. This means they are safe, legal, and ready to use anywhere. They keep signals clear and stop other systems from having problems. Every GPS wire harness is made to fit modern vehicles perfectly and safely.

Quality Control & Serviceability

Every GPS wire harness is thoroughly tested before it is sent out by the manufacturer. Each plug and wire is double-checked to ensure a tight fit and correct power flow. Any problems are addressed promptly. We subjected them to a series of tests in extremely hot and cold conditions as well as vibrations to ensure their durability. You may simply fix or replace the pieces when you need to. Because our team is always willing to pitch in, we never stop working. Put simply, each and every time, buyers get reliable, safe, and robust harnesses. We worry about quality so much that we give each customer the best product we can.

Ottenere un preventivo rapido

Trusted Certificates and Their Importance

Our workshop's commitment to quality, safety, and exceptional workmanship is confirmed by the several prestigious awards we have received. Like other well-known car manufacturers throughout the world, we strictly adhere to straightforward standards like ISO 9001:2015 and IATF 16949. Every single one of our manufactured parts, cables, and plugs undergoes stringent quality checks, including safety testing according to RoHS and CE standards. Even UL and TÜV have validated some of them. These checks demonstrate that we did the work in a proper, safe, and correct way. Car manufacturers and fleet owners keep using our harnesses because they are reliable, comfortable, and long-lasting. Our 300+ harness models have served clients well all around the world. All of our products are thoroughly tested, tracked, and inspected before they are sent out.

Ottenere un preventivo rapido

Most Experienced & Reliable Supplier for You

Custom cables and GPS wire harnesses made by QL-Custom Technology Ltd. are used by a wide variety of equipment, including vehicles and construction sites. With over 25 years of experience and strict adherence to all applicable safety standards, we guarantee that our products will always be of the highest quality and safety. Our extensive knowledge of vehicle systems allows us to design harnesses that work with a broad variety of vehicles. The speed with which our team responds, provides honest suggestions, and completes orders is legendary. Our harnesses are known for their affordable prices, high-quality components, and extensive testing. From design to molding, pressing, soldering, and testing, our factory takes care of every step in the GPS wire harness production process. Since we never outsource any of our work, you can be sure that you will always receive our undivided attention.

Ottenere un preventivo rapido

Customer Reviews

The harness worked great right out of the box. It was easy to set up, and the GPS stayed strong. The support team checked on us and helped with tips.

Ethan Caldwell

We use these for our vans. They fit fast, work clean, and make our tracking clear. So simple, so good!

Annie Johnson

Used these in police cars. All worked fine and passed all tests. Still running great.

Carlos Mendoza

We use the heavy ones on our factory gear. After months of dust and heat, still no problem. Very strong.

Zhang Wei

The universal kit saved time. It fits all our cars. So easy for our team to use.

Maria Rodriguez

We bought 100 harnesses for our trucks. They fit well and make tracking smooth. Great work.

John Smith

Prometto di rispondere in 4 ore!








    Domande frequenti