Dashboard Wire Harness

Product Introduction

You can keep the bundle of cables on your car's control panel neat and tidy with our Dashboard Wire Harness. It powers and sends signals to the lights, gauges, radio, engine controls, and safety systems. The cables are all neatly tied together, so they won't get hurt. The outside cover is strong and flexible, so you can easily tuck it away in small spaces. Constant shaking, heat, dust, and wetness are all kept out. Because of this, there is no friction and the wires stay in place. Inside, there are high-quality copper wires that make sure communications are clear and consistent. You can easily clip on, move, and change the harness. It works great in hot, humid places and places with a lot of dust. We put each wiring harness for the dashboard through a lot of tests to make sure it works well and lasts a long time.

Product Advantages

Heavy‑Duty Cable Assembly

You can count on this cable assembly to last through tough jobs and long periods of use. Its thick copper cables carry strong electrical currents. The outside shell is strong and can withstand chemicals, dirt, oil, and heat. The strong terminals on both ends make sure they won't slide or come loose. The cable won't break even when it vibrates or bumps into things every day. Works well in places with a lot of traffic, like work trucks, big machines, and busy roads. Even after hours of use, power stays steady and safe because of how well it is built.

Multi‑Pin Data Harness

A multi-pin data harness sends multiple signals to the dashboard at once. The bigger connection helps keep the cables neat and tidy. Every cable is well-insulated and sometimes shielded to keep signal noise from happening. This helps keep data clear and consistent. Because the connection is made to fit in only one way, there are fewer problems. This makes it possible for the dashboard to show more accurate information from the engine and sensors. It will be easier and faster for repairmen to switch out parts.

Interconnect Jumper Cable

A jumper cable connects small parts, like sensors and switches, to the bigger wiring system in the dashboard. Connections on both ends can be easily snapped into place. Even though it's small, it doesn't fit well behind the dashboard. It won't get cut or shortened, and it has insulation, so it's easy to bend. It makes it easy to keep wires clean and change them. It keeps the dashboard system clean and easy to use for professionals, and it also makes repairs faster. It saves time and money for every repair job.

Solution

This dashboard wire harness is a neat and strong way to wire your dashboard. If you use it roughly, it stops the wires from sliding, breaking, or twisting. Its simple plug-and-play design means you don't have to deal with messy tape repairs. Signals stay stable, and connectors stay tight.

Vehicle Wire Harness

This wire harness can be used on any vehicle, van, truck, or piece of heavy machinery. Its shape fits in with the dashboard, so there are no cords hanging down or getting in the way. Every wire and connection has a specific job to do. It meets strict standards for vibration, temperature, and heat. Before shipping, each part is tested. This makes it easier, safer, and cleaner to install dashboards in the long run.

Simple Interface Cable

A Simple Interface Cable connects the main dashboard wiring harness to a small module. It bends easily in tight spaces and has clean connections on both ends. It is easy to match because it is colour-coded and fully insulated. It helps keep wiring mistakes from happening and saves time during setup. Its thoughtful design ensures both long-term reliability and immediate installation efficiency for a stress-free experience.

Multi‑Connector Wire Harness

There are many connections on one wire in this harness. They can connect different devices, like radios, lights, air conditioners, and sensors. There is a specific color or shape for each connection to make sure it fits. This keeps the dashboard neat and easy to look at. You can change one part without changing the others. The strong support at each connector makes sure that the system is stable and safe. This makes it easier and faster to build and fix the dashboard.

Material Recommendation

Komponente

Was es bewirkt

Oxygen-Free Copper Wire

We use oxygen-free copper wire because it has a strong and stable signal and power conductivity. This copper doesn't have any tiny air pockets in it, so it can transmit power without any problems. Even when it gets wet, hot, or has particles in the air, it doesn't rust. The wire won't break if machines are always moving or shaking it, because it bends easily.

Plastic Granules

Strong plastic beads are used to make a lot of small parts, like clips, covers, and plugs. The molds are easy to fill with the beads because they melt quickly. Simple polymers like PBT and nylon are useful because they don't melt or fade too quickly and stay strong even when it's hot. We also protect the parts from the sun, heat, and salty air by using rust and ultraviolet (UV) blockers.

Corrugated Pipes

We use flexible corrugated tubing to protect the internal wiring of the transmission wire harness. These pipes had a strong outside that protected the wires from things like hot parts, sharp edges, and rough tools that could have hurt them. You can easily bend the pipes to fit into tight or curved spaces. We use pipes of different sizes to make sure everything fits just right.

Automotive Connectors

Our connectors are made of strong automotive-grade material that can handle high temperatures, dust, water, and being moved around a lot for long periods of time. Many of them have soft rubber seals that keep dirt and water out. A layer of gold or tin keeps the metal pins inside from rusting and keeps the signal clear.

Acetate Cloth Tape

We use strong, thin linen tape to cover the wires. This tape will stay put no matter how hot, oily, or full of fuel the surface gets. It bends without ripping, which keeps the wires in place and makes it easy to use. The tape will keep the harness from getting too thick or heavy.

Oxygen-free copper wire

Plastic granules

Corrugated pipes

Automotive connectors

Acetate cloth tape

Industries and Applications

Passenger Vehicles

This dashboard wire harness is made to keep all the wires that run under the dashboard of cars, vans, and small trucks neat and tidy. This makes the inside of the car cleaner.

Off-Road & Heavy Equipment

These harnesses are great for dealing with rough terrain like dirt, mud, dust, and bad weather. They stay strong no matter if the machine is going over flat or hilly ground.

Heavy Trucks & Buses

These dashboard wire harnesses are perfect for heavy trucks and buses because they are made for strong vehicles that work for long periods of time every day. They can handle high temperatures, strong electrical currents, and violent shaking.

Recreational & Marine Vehicles

Boats, ATVs, and RVs are some of the recreational and marine vehicles that use them. They can handle water, sun, wind, and constant shaking. The harnesses won't break if you use them outside, and they'll keep all the cables in place.

Industrielle Maschinen

These harnesses help keep factory wiring neat and easy to understand. They help keep everything in order and clear for machines that work all day long.

Custom & OEM

Our custom and OEM divisions can make unique harnesses for both new and old machines. Each one is made to fit a specific system based on its shape and function. We test every design to make sure it is strong, safe, and easy to care for.

Error-Proof Connector Coding for Easy Assembly

There are colour-coded connections, simple markings, and shaped keys that only fit in one place. The marks have been made bigger, so they are easier to read. It's almost impossible to connect the wrong plug because each one has a different shape or latch. Even in low light or tight spaces, you won't have to guess which plug goes into which socket. These clear signals help the workers do their jobs faster and more safely. The clear markings and easy grips make every connection easy and painless. These thoughtful design elements ensure quick and error-free assembly every time.

Over-Molded Junction Points for Better Dash Safety

We put a thick, flexible coating on each junction to make sure that all of the wire connections stay in place. This coating now covers a larger area, which gives it more support and protection. This keeps dust, moisture, heat, and vibration from getting to the wires. The coating dries to form a strong shell that keeps the wires safe for a long time. This strong cover won't let wires come loose or break. Because of the extra sealed area, every joint stays strong, no matter how hard things get. This makes the dashboard system last longer, with fewer breaks and mistakes.

Careful Planning, Detailed Checks & Safe Shipping

They look at safety, flow, and bending in the heat. When you get it, each dashboard wiring harness will have notes on it, so it's ready to go. This careful plan will make sure that there are no mistakes, missing parts, or delays. You get a harness that is clean, accurate, and ready to be installed.

Every dashboard wire harness starts with a correct schematic and a list of all the parts. We are currently adding more inspections and information. Before we begin, we check that every wire is the right size, color, route, and connection. We check every part during and after the building process.

Flex-Bend Cable Zones for Tight Dash Installs

We added some soft bend spots to the dashboard wire harness so that it could fit into tight spaces. Now that these bending points are longer, each wire can bend without putting too much stress on it. This means that the harness can be bent to fit tightly under panels and around sharp corners. The fragile bending design stops kinks and protects the wires from getting damaged too soon. The dashboard wire harness stays neat and steady even on busy dashboards because the bends are bigger and the curves are softer. These flex zones make it easy for anyone to put on the harness by settling into place and fitting with little effort.

Best Choice for Your Dashboard Wire Harness

QL-Custom Technology Ltd. makes dashboard wire harnesses that last with care and skill. We follow all the rules, test everything we do very carefully, and are always looking for ways to make our processes better. We can either copy an existing dashboard wire harness, fix any problems with it, or make a completely new one from scratch. Our staff is there for you every step of the way, listening, guiding, and helping you. We do everything we can to make sure that each harness is safe before it is sent out. We make sure that everything is clear and simple so that you can get a strong harness that works in any situation and is easy to put on.

Customer Reviews

My old dash had problems, but this kit fixed everything fast. The wires are strong, and the layout is easy to follow. It still works great after many long trips.

John Smith

I use my truck off-road. This dashboard wire harness stayed strong, dry, and steady the whole time. Great fit and great value.

Emily Davis

Good price, quick shipping, and easy instructions. The harness is tough and handles heat well.

Michael Brown

My custom car needed a special harness. This one fit perfectly and even came with extra connectors. Very well made.

Jennifer Wilson

I needed a harness like the original for my old van. This one fits and works just like the OEM part. Very happy with it.

David Johnson

My old dash wires failed. This new harness made my dash work like new again. Safe, clean, and smooth.