What is a Wago wire harness?

It is a pre-assembled set of conductors fitted with Wago connectors. Each conductor is cut, stripped and terminated to specification, and the harness is installed by plugging it in. This reduces installation time and wiring errors, and it keeps the panel organized.

What are the main Wago connector types?

Common Wago connector types include lever connectors, push-in connectors, splicing connectors and rail-mounted terminal blocks. Each suits a different task. Lever types allow quick changes, and push-in types suit solid conductors. Share your requirements, and we will recommend the right type.

What does Wago wire harness installation involve?

Wago wire harness installation takes minimal effort. The installer positions the plug and closes the latch, and no special tools are needed. Follow the labels at each end and check that every latch is fully closed. This takes far less time than conventional field wiring.

Are WAGO wire nuts the same as twist-on wire nuts?

No. The term WAGO wire nuts is widely used, but these products are spring-clamp connectors. They are not twisted onto the conductor. The installer raises a lever or pushes the conductor in, and the spring keeps a constant contact force. The transparent housing allows visual inspection.

What are Wago quick connect wire connectors?

Wago quick connect wire connectors join conductors in seconds. Push-in and lever designs need no screws. They are used in lighting, junction boxes, control panels and repair work, and their compact size and dependable contact suit both new installations and maintenance.

How is the Wago wire harness price determined?

The price depends on conductor size, length, connector type and order quantity. Waterproof components and special labeling add cost, while larger orders reduce the unit price. Submit your drawing, and we will provide a detailed quotation.

Wago wire harness - QL- Custom.com | Custom Over molding Cable Wire Harness Manufacturer

Q: How to use Wago connectors?

Strip the conductor to the length marked on the connector. Raise the lever or open the clamp, insert the conductor fully and close the lever. Pull gently to confirm it is held. The conductor size must always match the connector rating.

Wago Wire Harness Introduction

A Wago wire harness is a pre-assembled set of conductors fitted with Wago connectors. Each conductor is cut to length, stripped to specification and terminated before delivery. This removes the need for on-site twisting, soldering or crimping. Spring-clamp technology secures every Wago wire with constant contact force, so the connection remains stable under vibration and temperature change. Pre-assembly reduces installation time and limits wiring errors. Panel builders, machine manufacturers and lighting contractors use these harnesses to standardize their wiring. Each assembly follows a defined drawing, so results are repeatable from one unit to the next. The harness also simplifies inspection, since conductor routing and termination are documented. For projects that need orderly wiring and dependable performance, a pre-built harness is a practical solution.

احصل على عرض أسعار سريع

Gray Wago wire harness with lever connectors

Wago Wire Harness Series

Three harness series cover the main needs of industrial wiring. The straight-through and multi-circuit branch series suits point-to-point links and distributed power. The docking waterproof series is suitable for wet and dusty locations. The pluggable custom series supports modular equipment and project-specific designs. All series use genuine WAGO wire connector components and carry clear identification.

Wago straight-through branch harness on a DIN rail

Wago Straight-Through & Multi-Circuit Branch Wire Harness

The straight-through harness provides a direct link between two points, with one conductor in and one conductor out. The multi-circuit branch harness distributes a single supply to several loads, such as lamps, relays or sensors. Each branch is cut to the length stated on your drawing, and both ends are marked for identification. Wago wire connectors secure every strand and prevent loose terminations. Controlled routing keeps the panel orderly and accessible, so technicians can inspect and service individual circuits without disturbing the rest. The design reduces field terminations and the risk of error. It suits control cabinets, distribution boards and machine wiring.

Wago docking waterproof harness with sealed housing

Wago Docking Waterproof Wire Harness

Damp and dusty environments require sealed connections. The docking waterproof harness protects each joint with a sealed housing and rubber seals around the conductor. This prevents moisture and particles from reaching the contact area. Typical applications include pumps, outdoor lighting, marine equipment and food processing plants. The docking design joins two harness halves with a secure locking action, allowing fast on-site connection. The halves can be separated for service without cutting any conductor. Please state the required ingress protection level when you order, and we will specify seals and housings that meet the conditions of your site.

Wago pluggable custom harness with flat cable

Wago Pluggable Custom Wire Harness

Some projects need a harness designed for a specific layout, and the pluggable custom series meets this need. Send a drawing, a sample or a written specification, and we will manufacture the harness to match. Wire gauge, insulation color, length and connector type are all selectable. Pluggable ends let modules be connected and removed in seconds. This suits modular machines, test racks and equipment that is serviced often. A faulty module can be replaced without rewiring the panel. Every assembly carries clear identification tags. Orders range from single prototypes to large production runs, with the same quality procedures for each.

Wago Connector Family

222-415

221-413

221-612

221-415

222-412

222-413

221-615

2273-204

221-412

221-2401

231-638

231-632

2091-1378

218-120

231-103 & 037-000

231-105 & 026-000

231-107 & 026-000

231-109 & 037-000

231-202 & 008-000

231-2102 & 026-000

231-308 & 026-000

231-602

231-603

231-606

231-635

231-649

232-163

2706-211 & 000-016

2734-102

2734-102 & 037-000

2734-107 & 107-000

2734-1102 & 327-000

2734-1103 & 327-000

294-5013

294-5032

294-5072

294-8024

721-203 & 026-000

721-603

721-605

721-605 & 000-042

721-607

731-603

734-103 & 037-000

734-104

734-110

734-112 & 037-000

734-113

734-132

734-135

734-303

734-304

769-103

769-603

769-604

769-608 & 002-000

769-610 & 006-000

831-1103

832-1201 & 011-000

870-832

Wago Wire Harnesses Have Four Core Advantages

Four core advantages define the Wago wire harness. The core components are original, processing is precise, installation needs no tools, and the finished assembly performs reliably in demanding environments. Together, these qualities lower cost and reduce risk.

Original Core & Permanent Stable Connection

The connector is the foundation of every harness, and we use original Wago components exclusively. The internal spring clamp applies constant, even pressure to the conductor, and this pressure does not diminish over time. Temperature change and vibration do not loosen the connection. A loose termination is a common cause of faults in electrical panels, and a gas-tight contact directly addresses this issue. The result is a stable connection with a long service interval and no screws to retighten. Reduced maintenance lowers downtime and labor costs, and operators can rely on consistent contact quality throughout the equipment's service life.

Precision Processing & Zero-Fault Conduction

Reliable components need accurate processing. Our machines cut every conductor to the specified length and strip it to the dimension the connector requires. A strip length that is too short weakens contact, while one that is too long exposes bare copper, so controlled processing avoids both. After assembly, each harness is checked for continuity from end to end. Insulation and pin-to-pin tests identify any short circuit, and nonconforming assemblies are removed before dispatch. You receive harnesses that perform as specified when commissioned, with less rework and fewer warranty claims.

Tool-Free Installation & Significant Cost Reduction

Installation time directly affects project cost, and a pre-built harness removes many hours of field wiring. Wago wire harness installation only requires the installer to position the plug and close the latch. No screwdriver, soldering iron or crimping tool is needed, and new staff can learn the procedure quickly. For individual connectors, how to use Wago connectors is just as simple: raise the lever, insert the stripped conductor and close the lever. Fewer steps reduce the chance of error, and fewer errors reduce rework. On large projects, the savings in labor, training and tooling add up quickly.

Industrial-Grade Weather Resistance & Long Service Life

Industrial sites expose wiring to dust, oil, heat and cold, so our harnesses are built from materials selected for these conditions. Conductor insulation is chosen to suit the application, and connector housings are made of durable, flame-retardant plastic. Sealed versions protect against moisture and particles, and the spring clamp keeps its contact force under vibration. For outdoor use, we recommend a sealed assembly with UV-resistant insulation. A long service life reduces replacement frequency and total cost of ownership, and it supports the continuous operation that production equipment depends on.

Precision-Processed Wago Wire Harness

Consistent quality depends on controlled manufacturing. Our workshop runs three main machines, each assigned to a defined task. Together, they deliver accurate cuts, uniform crimps and correct terminal placement, which keeps every assembly identical across repeat orders.

Ultra-Quiet Terminal Machine

This machine crimps metal terminals onto the ends of conductors. Its low-noise operation makes the workplace safer and more comfortable. A stable drive applies the same force to every crimp, and a uniform crimp gives a uniform electrical connection. The machine monitors crimp height during operation and stops if a value falls outside tolerance. Low vibration reduces tool wear and extends tool life, giving repeatable output with a low rejection rate.

Fully Automatic Double-Head Terminal Machine

This machine processes both ends of a conductor in a single pass. It feeds, cuts, strips and crimps automatically, and the two-head setup doubles throughput. Length stays consistent from the first piece to the last, supporting on-time delivery of large orders. Built-in sensors detect wire jams and defective crimps, and the line stops before an error can spread. Changeover between jobs is quick, so mixed and custom orders are handled efficiently.

Automatic Single-Head Casing Machine

After crimping, each terminal must be inserted into its housing. This machine does that with controlled force, placing each terminal in the correct cavity and orientation. Accurate placement is essential in multi-pin connectors, where one misplaced terminal interrupts the circuit. Even insertion force prevents damage to the plastic housing. The terminal is pushed until the lock engages, and a sensor then confirms full seating, removing a frequent source of assembly errors.

احصل على عرض أسعار سريع

Labeled wires terminated in Wago lever connectors

Strict Quality Control of Wago Wire Harnesses

Quality control is applied at every stage of production. Incoming wire, terminals and connectors are inspected before use, and cut length and strip dimensions are verified during assembly. Every finished harness undergoes a continuity test, including pin-to-pin verification and a short-circuit check. A pull test confirms the retention force of each termination, and inspectors also verify color coding, labels and fit. Each batch is recorded, which allows full traceability. When a nonconformity is found, we investigate and correct the root cause. The final product conforms to your drawing.

احصل على عرض أسعار سريع

الصناعات والتطبيقات

Factory Automation

Machines depend on stable signals. Our harnesses connect PLCs, drives and sensors with joints that stay secure under vibration. Line changes can be completed in minutes, which supports flexible production.

Building and Lighting

Lighting, ventilation and control boxes need orderly, safe wiring. Pre-assembled sets speed up fit-out work, and electricians can find and fix faults without opening walls. Clear identification supports every step.

Solar and Energy

Photovoltaic systems work in sun, wind and rain. Sealed harnesses keep connections dry and secure, and branch assemblies feed multiple strings from one point. Maintenance demands on site teams stay low.

Transport and Vehicles

Buses, trains and service vehicles face constant vibration. Spring clamps keep conductors held firmly across the duty cycle, and pluggable ends allow rapid component replacement. Vehicle availability improves.

Food and Water Plants

Washdown areas expose equipment to spray and moisture. Waterproof harnesses prevent water from entering at the connection point, smooth housings are simple to clean, and stable power supports continuous operation.

Reusable Connections for Rapid Circuit Changes

Repeated Opening and Closing

Lever-type connectors can be opened and closed many times. A conductor can be moved, a new circuit path tested and the lever locked again, with no cutting required. Wago quick connect wire connectors make each change quick and controlled.

Spring Clamps Instead of Twist-On Caps

Many installers call these connectors WAGO wire nuts. They are actually lever or push-in connectors, where a spring clamp holds the conductor instead of a twisting action. The transparent housing lets you see the conductor position, which simplifies inspection.

Suited to Testing and Upgrades

Laboratories and pilot lines change their circuits often. A reusable connection lets you change a setup without new materials, and the same harness stays in service while the plug is moved. This cuts wire waste, labor time and cost.

Pluggable Interfaces for Sensor and Actuator I/O

A dedicated plug for each sensor keeps wiring organized.
A faulty sensor can be replaced without opening the full panel.
Compatible with valves, motors and limit switches.
Keyed plugs prevent incorrect insertion.
Signal and power can share a single cable run.
Pre-tested leads shorten commissioning time.

Color-Coded Labeling for Error-Free Maintenance

Standardized Wire Color Identification

Each conductor color matches a defined function. We apply your color scheme or the standard used in your region, so technicians can identify a circuit at a glance and avoid wrong connections during installation.

Permanent Identification Tags at Both Ends

Every conductor carries a durable label at each termination point, showing a reference number or circuit name that matches your wiring documents. Both ends can be matched directly, without extra testing.

Reduced Diagnostic and Repair Time

Color coding and end labels let a technician trace a circuit from the label to the connector without disturbing other wiring. Fault finding is faster, contact with live equipment is limited, and repairs cause less downtime.

آراء العملاء