FEP Connector

Sealed FEP connector housings for Volkswagen, Audi and other vehicle platforms, built into wire harnesses that fit the first time. Send your part numbers or a sample, and QL-Custom will build the harness to your drawing.

FEP Connector brand

FEP Connector brand

FEP stands for Fahrzeugelektrik Pirna, a German automotive connector maker. Founded in 1949 in Pirna, near Dresden, it designs and builds plastic electrical connectors for vehicle wiring, plus switching and sensing parts. FEP operates sites in Germany, China and Mexico, and it is now part of the Amphenol Group. Many FEP housings carry Volkswagen part numbers, such as 1J0 973 723, as they fit Volkswagen and Audi platforms. The range includes sealed and unsealed housings, shielded and unshielded versions, and housings for different current and voltage ranges. QL-Custom Technology Ltd. builds wire harnesses, pigtails and repair leads around the FEP connector range. Send us an FEP or VW part number, drawing or sample, and our engineers will match the housing, terminals and seals.

FEP Connector Portfolio

Core advantages of FEP Connector

Core advantages of FEP Connector

Full Weather Resistance & Long Lifespan

Engine bays and wheel arches are hard places for wiring. Sealed FEP housings use wire seals and an interface seal to keep water, dust and road salt away from the contacts. Many also add a secondary lock that holds each terminal firmly under vibration. In our harnesses, we match every seal to the wire size, plug each empty cavity and add strain relief where the wires leave the housing. The connection stays dry and tight for years of service.

Stable Performance & Certified Safety

A harness is only as reliable as its crimps. We crimp on automatic machines, check crimp height and test pull force on every setup. Each finished harness then goes through a 100% electrical test for continuity, shorts and wrong pin positions. QL-Custom works to an ISO 9001:2015 quality system, and every batch carries a record of its materials and test results.

Exquisite Craft & Eco-friendly Versatility

FEP housings are keyed and color-coded, so each plug only mates with the right part. That speeds up assembly and cuts service mistakes. The same housing family appears on sensors, lights, actuators and switches, so one connector system can serve many of your harnesses and reduce the parts you stock. We build with RoHS- and REACH-compliant materials.

FEP Connector Production and Process

Good harnesses start with a clear plan. We keep each step simple, checked and recorded, from the first wire cut to the final pack. What you approve on the drawing is exactly what arrives at your door.

High-purity raw materials & precision molding

High-purity raw materials & precision molding

We use automotive-grade wire from trusted suppliers like FLRY, TXL and GXL, sized for your current and routing needs. Housings, terminals and seals are verified against your BOM before production. When a branch needs extra protection, we add overmolded strain relief in our molding shop. Molding settings use tested values, so every part stays consistent.

Rigorous full-item inspection for reliable quality

Rigorous full-item inspection for reliable quality

We check every harness, not just a few from each batch. Crimp height, pull force and cross-section samples confirm each terminal. Operators make sure every terminal clicks into place and every secondary lock is closed. A test bench then checks each circuit for continuity, shorts and wrong pin positions. Each batch gets a lot number, so any part can be traced back to its materials.

Flexible customization for personalized solutions

Flexible customization for personalized solutions

Your project is not like anyone else's, so your harness should not be either. Send us a drawing, a sample or a list of FEP or VW part numbers. We can change wire lengths, colors, gauges, labels, sleeving and connector ends. Pigtails, repair leads and adapter harnesses are all welcome. Small sample runs come first, so you can check the fit before you place a larger order.

FEP connector wiring harness solutions

Aerospace, Military & Automotive
Electronics

Vehicles shake hard, run hot and face fuel and oil. FEP housings were designed for this world, and they are fitted across Volkswagen and Audi platforms. We build engine, sensor, lighting and repair harnesses around them, matched to your pin map and lengths. For aerospace and military projects, we build to your specification and use the connector family your standard calls for. Our engineers will tell you when an FEP connector is the right choice and when another series fits better.

Aerospace, Military & Automotive Electronics

Precision Equipment, Semiconductor &
Photovoltaic

Test rigs, production tools and solar systems need wiring that stays stable for years. Sealed FEP connectors keep moisture and dust away from the contacts, which helps outdoor and wash-down equipment. We build harnesses for test benches, sensors and auxiliary circuits, with clean routing and clear labels. Shielding and twisted pairs can be added wherever signal quality matters.

Precision Equipment, Semiconductor & Photovoltaic

Industrial Automation & Petrochemical
Extreme Condition

Factory machines run long shifts, and site equipment faces heat, oil and constant vibration. Our harnesses use oil-resistant wire, abrasion sleeves and sealed connectors wherever the job needs them. Every branch is routed and labeled to your drawing, so installation and service go faster. Tell us the temperature, fluids and movement the harness will face, and we will choose the wire and protection to match.

Industrial Automation & Petrochemical Extreme Condition

Industries and Applications

Chemical Processing

Chemical Processing

Pumps, valves and dosing skids often sit near splashes and washdown. Sealed FEP connector housings keep moisture and dirt away from the contacts on sensor and actuator lines. We add chemical-resistant sleeving where the harness runs near harsh fluids. Tell us what fluids are nearby, and we will choose the right wire jacket.

Semiconductor and Electronics

Semiconductor and Electronics

Test benches, handling tools and inspection rigs all need clean, durable and stable wiring assemblies. Keyed FEP housings effectively prevent wrong mating during setup and routine field service work. We build neat, clearly labeled harnesses that are easy to safely route inside tight metal tool frames.

Medical and Life Science

Medical and Life Science

Lab carts, mobile devices and test equipment need compact, reliable electrical connection leads. We build small custom wiring harnesses with sealed/unsealed plastic housings and clear ID labels. Every unit is fully performance tested before shipping, detailed batch records support your team's paperwork.

Food and Beverage

Food and Beverage

Filling and packing machines are washed down quite often within busy food production areas. Sealed connectors and oil-resistant wire help wiring harnesses survive tough frequent cleaning cycles. Smooth protective sleeving is easier to wipe clean than loose open wire bundles.

Aerospace and Automotive

Aerospace and Automotive

FEP housings are fitted widely across Volkswagen and Audi platforms for sensors, lights and switches. We build engine, body and repair harnesses around them. For aerospace ground equipment and test rigs, we build fully to your specification and choose the connector family it specifically calls for.

Energy, Solar, and Oil and Gas

Energy, Solar, and Oil and Gas

Sun, salt and sand gradually wear down unprotected exposed electrical wiring. Rugged sealed housings, UV-resistant sleeving and robust strain relief help our custom harnesses reliably last at harsh remote outdoor sites. A longer service life means fewer costly trips for field repair crews.

Sealing Design for Dry, Reliable Connections

Sealing Design for Dry, Reliable Connections

Seals Matched to Wire

We carefully measure the wire insulation diameter before we fit a rubber seal. A seal that is too loose lets water in, and one that is too tight can tear the insulation. Each seal sits snugly, so the housing keeps its IP rating.

Every Empty Cavity Plugged

Unused cavities will always get a durable sealing plug. Any open hole is the fastest simple way to flood a tightly sealed electrical connector. We carefully check every single housing before it moves forward to the next assembly step.

Locks Fully Closed

Each terminal connector must click home firmly, and each secondary lock must close fully into place. A half-seated terminal can work loose under mechanical vibration. Our operators carefully check both features on every finished plug assembly.

Clean Handling, Clean Pack

Finished harnesses are coiled with extra care, never bent sharply right at the rubber seal. Each order goes into clean, properly labeled plastic bags. You can easily open the bag and install the harness on the exact same day.

  • Connector ends: FEP plastic housings can be installed on one or both wire ends, or mixed with other matching connector series on the same finished wiring harness assembly unit.

  • Size range: From short pigtails to long multi-branch looms, in metric (mm²) or AWG wire sizes.

  • Branch layouts: Splits, splices and Y-leads, we build all these custom fabricated wire harness branches, routed precisely to fully comply with your technical drawing or physical form board template.

  • OEM branding: Add your part numbers, labels or private packaging, custom logos, marking options and unique branded packaging designs.

  • Drawing to part: Send CAD files, a sample or part numbers. We check fit and cost, then share a quote and a sample plan.

  • Fit guides: Ask for a simple pinout and installation sheet, so your on-site technical team can install these wiring harness products with greater ease directly on location during regular field tasks.

  • Steady supply: Plan your production batches ahead of schedule, and we will hold reliable safety stock on hand so your manufacturing line never has to wait for your needed critical raw materials and key components.

Custom Wiring Harness Configurations and Full OEM System Integration Solutions

We offer custom wiring harnesses & OEM integration. Prototype to mass production, delivering reliable connectivity for automotive, industrial, new energy.

Custom FEP wiring harness

Customer Reviews

★★★★★

We moved our sensor leads to their FEP harnesses last spring. Not one failure since, and the install was simple.

★★★★★

They matched our VW part numbers to the right housings within a day. The samples fit on the first try.

★★★★★

They turned my rough sketch into a working adapter harness. The team answered every question in plain words.

★★★★★

We run our test rigs all day long. The harnesses stayed clean and steady through many months of hard real use.

★★★★★

Our repair leads go into vehicles for service every week. The seals hold, and the labels make each repair job faster.

★★★★★

Their pinout sheet helped our new technicians get up to speed faster. Fit and finish are the best we have bought.

Purchase Exact and Reliable FEP Connector

Purchase Exact and Reliable FEP Connector

Why pick QL-Custom Technology Ltd.? We treat every FEP connector harness like an engineering project. We know the housings, terminals, seals and tests, so we can guide you from the first sketch to the final part. Our team speaks plain language and answers fast. We share test data and keep clear records, so you always know what you are getting. Whether you need one sample or a long production run, the quality stays the same. As a custom wire harness, cable assembly and overmolding manufacturer, we handle design, building and testing under one roof. Send us your drawing or part numbers today, and get a clear, honest quote.